керівництво користувача SIEMENS GIGASET SX762

[. . . ] EN Dear Customer, Gigaset Communications GmbH is the legal successor to Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), which in turn continued the Gigaset business of Siemens AG. Any statements made by Siemens AG or SHC that are found in the user guides should therefore be understood as statements of Gigaset Communications GmbH. Sehr geehrte Kundin, sehr geehrter Kunde, die Gigaset Communications GmbH ist Rechtsnachfolgerin der Siemens Home and Office Communication Devices GmbH & Co. [. . . ] Every PC (network adapter) that requires access to a WPA-protected wireless network must also support WPA. To find out whether and how you can use WPA on your PC, read your network adapter's user guide. If all components support WPA2, select WPA2-PSK. If you are using network adapters that only support WPA, select WPA2-PSK / WPA-PSK. The entries described below are identical for both options. ì Select the required option in the Security field. ì Enter a key in the Pre-shared key field (up to 32 characters) and confirm it by entering it again. Use a combination of letters, digits and special characters. ì Apply the settings by clicking OK. 70 Configuring Advanced Settings WPA and WPA2 with authentication server In large networks (e. g. in companies) WPA enables the use of an additional authentication service. In this case, user access is controlled by user accounts and passwords, in addition to WPA encryption. A RADIUS server acts as an authentication server. You can select the new WPA2 standard if it is supported by all components in your wireless network. Select WPA2 / WPA if you are using devices that only support WPA. ì Select the required option in the Security field. ì Enter the IP address of the RADIUS server in the RADIUS server IP address field. ì Enter the port of the RADIUS server in the RADIUS server port field. ì In the RADIUS server secret key field, enter a keyword that conforms to the conventions of the RADIUS servers that the server is to use for authentication. ì Click OK to apply the settings. 71 Configuring Advanced Settings WEP encryption If WPA is not supported by all components in your wireless network, we recommend that you activate WEP Encryption on the components. ì Choose the WEP option in the Security field. ì Select the Authentication type: ­ Select Shared to require that each client log in to the network with a specified key. ­ Select Open to permit data transfer within the wireless network without the need to enter a key. You can choose either the standard 64-bit key or the more robust 128-bit key. The keys are generated in hexadecimal or in ASCII format. You must use the same keys for encryption and decryption for the Gigaset SX762 WLAN dsl and all your wireless network adapters. ì Select the Key length: 64 bits or 128 bits. whether the key is to be entered manually or generated automatically by means of a Passphrase. 72 Configuring Advanced Settings Manual key entry ì Select the Key type, Hex or ASCII. If you select Hex as the key type you can use the characters 0 to 9 and A to F. ­ With a 64-bit encryption depth, the key is 10 characters long. An example of a valid key: 1234567ABC ­ With a 128-bit encryption depth, the key is 26 characters long. An example of a valid key: 234567ABC8912345DEF1234567 If you select ASCII as the key type, you can use the characters 0 to 9, A to Z, a to z plus the special characters in the ASCII character set. ­ With a 64-bit encryption depth, the key is 5 characters long. [. . . ] 16, 30 Internet protocol, see IP protocol Internet service provider . 132 ISP, see Internet service provider Mobile network . 65 LED behaviour after initial connection . 27 Local area network, see LAN Local IP address, see Private IP address Login screen . [. . . ]